Images are representations only.
F131 Batch Controller
Brand: FluidwellThe F131 offers, in addition to the standard batch control functions, an Analog output signal in relation to the displayed flow rate.
The operator can enter a batch quantity easily or execute repeating batches. During the batch, the preset value and flow rate are displayed simultaneously with the batched or remaining quantity.
The automatic self-learning overrun correction will ensure an accurate batch every time. On-screen engineering units are easily configured from a comprehensive selection.
Features- Large display shows preset value, running batch value and instantaneous flow rate
- Self-learning overrun correction
- Easy operation to enter a batch value and to control the process
- Count-up and count-down function available
- Selectable on-screen engineering units; volumetric or mass
- Explosion/flame proof Ex II 2 GD EEx d IIB T5
- Full Modbus communication RS232/485/TTL
- Loop or battery powered, 8 - 24 Vac / Vdc or 115 - 230 Vac power supply
- Sensor supply 3.2 / 8.2 / 12 / 24 Vdc
Specifications
Brand
Accuracy
- ± 0.125 % of Full Scale Output
Approvals & Certifications
- ATEX
- CE
- EMC
- IEC
- IEC Ex
Communication
- Modbus ASCII/RTU
Conduit Connection
- 1/2” NPT
- M12
- M16
- M20
- PG9
Display
- Numeric & Alphanumeric
Electrical Connectors
- Removable Plug-In Terminal Strip
Enclosure, Body Material
- Aluminum
- Fiberglass
- PolyCarbonate Window
- Silicone Sealing
- Three Industrial Micro-Switch Keys. UV-Resistant Silicone Keypad
Environmental Protection
- IP65
- IP67
- NEMA 4X / IP65, 67
Function
- Linear
Input
- 0-10 Vdc
- 4-20 mA
- Active Pulse Signals
- NAMUR
- NPN/PNP Pulse
- Reed Switch
- Sine Wave (Coil)
K-Factor
- Programmable from 0.0001 to 99999
Load Impedance
- 3,000 ohms Min.
Operating Temperature
- -30° to 80° C (-22° to 176° F)
Power Options
- 115-230 Vac
- 8-24 Vac/Vdc
Resolution
- 14-bits
Voltage Drop
- 2.5 V @ 20 mA
