Images are representations only.
Price
$2,882.00
CAD
Stock
11 In Stock
Does not ship to OH, United States
- Body Material - Valves with Stainless Steel Body
- Size - DN 10 to 40 mm
- Materials / Medium Temperature - NBR Diaphragm, Epoxy Coil / -10° to 80° C (14° to 176° F)
- Port Connection / Orifice - G1-1/2” / 40 mm
- Voltage / Frequency - 24 V, 50 Hz
Specifications
Ambient Temperature Range
- Maximum
Approvals & Certifications
- UL (MH10753)
- UR
- VDE 0631 According to DIN EN 60730
Bonnet Material
- Polyamide (PA6)
BSP Connection
- G 1” Female
- G 1/2” Female
- G 1/4” Female
- G 1-1/2” Female
- G 1-1/4” Female
- G 2” Female
- G 3/4” Female
- G 3/8” Female
- 1” BSPT Female
- 1/2” BSPT Female
- 1/4” BSPT Female
- 1-1/2” BSPT Female
- 1-1/4” BSPT Female
- 2” BSPT Female
- 3/4” BSPT Female
- 3/8” BSPT Female
Consumption
- Power Consumption (AC): 125-140 VA (Inrush) - HP00
- Power Consumption (AC): 14 VA / 8 W Hold (Hot Coil)
- Power Consumption (AC): 34-190 VA (Inrush)
- Power Consumption (AC): 37 VA / 16 W Hold (Hot Coil)
- Power Consumption (DC): 10 W Hold (Hot Coil)
- Power Consumption (DC): 11 W Hold (Hot Coil) at Coil Temperature 20° C (68° F)
- Power Consumption (DC): 16 W Hold (Hot Coil) - HP00
- Power Consumption (DC): 21 W Hold (Hot Coil) at Coil Temperature 20° C (68° F)
- Power Consumption (DC): 28 W Hold (Hot Coil)
- Power Consumption (DC): 29 W Hold (Hot Coil) at Coil Temperature 20° C (68° F)
Cover Material
- DN 10-25 mm: 304 Stainless Steel, 1.4301
- DN 40: 316 Stainless Steel - ASTM A351 CF8M, 1.4408
- DN 40: Brass
- DN 40: Nickel-Plated Brass (5 μm)
Diaphragm Material
- Diaphragm Support: Polyphenylene Sulfide (PPSGF40) in Combination with Brass & Accordingly Stainless Steel Parts
- EPDM
- FKM
- NBR
Duty Cycle
- 100 % Continuous Rating
Electrical Connectors
- Tag Connector According to DIN EN 175301-803 Form A
Electrical Contacts
- Normally Closed
Enclosure, Body Material
- 316 Stainless Steel - ASTM A351 CF8M, 1.4408
- Brass According to DIN EN 50930-6
- Nickel-Plated Brass (5 µm)
Environmental Protection
- IP65 with Cable Plug
- IP66
- NEMA 4X, 250
Insulation
- Coil Insulation Class H, B
Internal Part Material
- Brass
- Polyphenylene Sulfide
- Stainless Steel
Materials of Construction
- Insulation Coil Class H: Epoxy
- Insulation Coil Class H: Polyamide
- Magnetic Core, Stopper (DN 10 to 40 mm): 434 Stainless Steel (1.4113)
Mounting Position
- Preferably with Actuator Upright
NPT Connection
- 1” NPT Female
- 1/2” NPT Female
- 1/4” NPT Female
- 1-1/2” NPT Female
- 1-1/4” NPT Female
- 2” NPT Female
- 3/4” NPT Female
- 3/8” NPT Female
Nut & Bolt Material
- Locknut: 303 Stainless Steel, 1.4305 - Stainless Steel Body
- Locknut: PTFE-Coated - Stainless Steel Body
- Locknut: Steel (Surface Thick Film Passivated According to Rohs) - Brass Body
O-Ring Material
- FKM
Orifice Size
- 0.393” to 1.574” (10 to 40 mm)
- 0.511” to 0.787” (13 to 20 mm) - HP00
Process Temperature
- EPDM: -30° to 100° C (-22° to 212° F) with Polyamide, Epoxy Coil
- FKM: 0° to 120° C (32° to 248° F) with Polyamide, Epoxy Coil
- NBR: -10° to 80° C (14° to 176° F)
Response Time
- 0.1 to 4 seconds (Depending on Orifice & Differential Pressure)
Ring Material
- Shading Ring (AC Version): Copper - Brass Body
- Shading Ring (AC Version): Silver - Stainless Steel Body
Seat / Seal Material
- Plunger Seal: EPDM (Medium: Oil & Fat Free Fluids & Gases)
- Plunger Seal: FKM (Medium: Per Solutions, Hot Oils with Additives)
- Plunger Seal: NBR (Medium: Neutral Fluids, Water, Hydraulic Oil, Oil without Additives)
Size
- Coil Size Width (AC): 1.259” to 1.653” (32 to 42 mm)
- Coil Size Width (AC/DC): 1.653” (42 mm) - HP00
- Coil Size Width (DC): 1.574” to 2.559” (40 to 65 mm)
Solenoid Type
- 2/2-Way
Spring Material
- 301 Stainless Steel, 1.4310
Tolerance
- Voltage Tolerance: ± 10 %
Viscosity
- Medium Viscosity: Max.
Voltage
- 120 V / 60 Hz
- 24 Vdc
- 24-110 V / 50 Hz
- 24-230 V / 50/60 Hz - HP00
