Price
$498.00 CAD
Stock
50+ In Stock
Does not ship to OH, United States

  • Model - Standard Version
  • Pressure Inlet / Service Port - G 1/4” / G 1/8”
  • Orifice Size / Power Consumption - 1.5 mm / 2 W
  • Body Material - Polyamide
  • Voltage / Frequency - 230 V / 50 Hz

Specifications

Ambient Temperature Range

  • 55° C (131° F) - Max.

BSP Connection

  • G 1/4” Female
  • G 1/8” Female

Consumption

  • Power (DC Hot/Cold Coil): 8/9 W
  • Power: 17 VA [Hold AC (Hot Coil)]
  • Power: 24 VA (Inrush AC)
  • Power: 2-8 W
  • Power: 8 W [Hold AC (Hot Coil)]

Duty Cycle

  • Single Valve: 100 % Duty Cycle Continuous Rating

Electrical Connectors

  • Cable Plug
  • DIN EN 175301-803 Form A

Electrical Contacts

  • Normally Closed

Enclosure, Body Material

  • Flange: Brass
  • Flange: Polyamide
  • Stainless Steel
  • Valve: Aluminum

Environmental Protection

  • IP65 with Cable Plug
  • IP66
  • NEMA 4X with Cable Plug

Flow Rate

  • Air: 75 to 174 QNn (L/min)

Insulation

  • Coil Insulation: Class B
  • Insulation Class: Epoxy Class H

Materials of Construction

  • Armature Guide Tube: AISI 305 Stainless Steel, 1.4303
  • Coil: Epoxy - High Temperature Version
  • Coil: Polyamide (PA)
  • Stopper, Magnetic Core: AISI 430FR Stainless Steel (1.4105)
  • Sub Base: AISI 304 Stainless Steel, 1.4301
  • Sub Base: Steel (Surface Finish Thick Film Passivated)

Media

  • Compressed Air
  • Hydraulic Oil
  • Natural Gas
  • Neutral Gases & Fluids
  • Technical Vacuum
  • Town Gas
  • Water

Mounting Position

  • Preferably with Actuator Upright

Nut & Bolt Material

  • Lock Nut: Steel (Surface Finish Thick Film Passivated)

O-Ring Material

  • FKM
  • NBR

Operating Voltages

  • 230 Vac / 50 Hz
  • 24 Vac / 50 Hz
  • 24 Vdc

Orifice Size

  • 0.05” to 0.09” (1.5 to 2.5 mm)

Override

  • Manual Override

Pressure Range

  • psi: 0 to 145 (kPa: 0 to 1,000, bar: 0 to 10)

Process Temperature

  • Epoxy Coil: -10° to 120° C (14° to 248° F)
  • Polyamide Coil: -10° to 100° C (14° to 212° F)

Response Time

  • AC & DC (Opening, Closing): 10 to 22 milliseconds

Ring Material

  • Shading Ring: Copper (Cu) - Brass Version
  • Shading Ring: Stainless Steel (Ag) - Stainless Steel Version

Screw Material

  • AISI 304 Stainless Steel 1.4301
  • Brass (CuZn)

Seat / Seal Material

  • Armature Seal: FKM
  • Seal (Usit Ring): Aluminum
  • Seal (Usit Ring): NBR
  • Seal: EPDM

Solenoid Type

  • 3/2-Way

Spring Material

  • AISI 301 Stainless Steel 1.4310

Tolerance

  • Voltage: ± 10 %

Viscosity

  • 21 mm²/sec, Max.

show more