Images are representations only.
TAU003 Float-Type Flow Meter
Brand: Burkert Fluid Control SystemsIf a medium with sufficient flow rate flows from bottom to top through a vertically inserted measuring tube, then the floated element raised so far, till an equilibrium between the lift strength of the medium itself and the weight of the floated element is adjusted.
Since the average flow rate is proportional to the flow quantity per time unit, the determined equilibrium corresponds to the flow volume. Flow meters with solenoid floated elements can be equipped with limit value contacts.
Features- Flow measurement for translucent liquids and gases
- DN 10 to DN 65 mm
Specifications
Ambient Temperature Range
- 55° C (131° F) - Max.
Class
- Accuracy: Class 4 According to VDE/VDI 3513 Sheet 2
Connection Material
- Internal Thread: Malleable Cast Iron
- Internal Thread: V4A Stainless Steel
- True Union, Internal Thread: PVC-U
- Welded Sleeve, Weld End, Internal Thread: Polypropylene (PP)
- Welded Sleeve, Weld End, Internal Thread: PVDF
Materials of Construction
- Float (without & with Solenoid), Inserts: PVDF
- Measuring Tube: Polyamide (PA)
- Measuring Tube: Polysulfon (PSU)
- Measuring Tube: PVC-U
Measuring Range
- 1.5 to 60,000 L/hr
Media
- Aggressive Fluids
- Neutral
Mounting Position
- Vertical Medium Current from Below to Above
Nominal Pressure
- psi: 145 (kPa: 1,000, bar: 10) - Max.
O-Ring Material
- Seal O-Ring: EPDM
- Seal O-Ring: FPM
Orifice Size
- 10 to 65 mm
Pressure Drop
- psi: 0.06 to 0.69 (kPa: 0.45 to 4.8, Mbar: 4.5 to 48)
Process Temperature
- 40° to 100° C (104° to 212° F)
