Images are representations only.
F143 Temperature Monitor
Brand: FluidwellThe F143 is a versatile temperature indicator featuring continuous temperature monitoring.
It offers the ability to set two low and two high temperature alarm values. If desired, an ignore function can be set up to allow for an incorrect temperature for a certain period of time.
Up to four outputs are available to transmit alarm conditions and actual temperature. The display shows the actual temperature, alarm values, alarm messages and status. On-screen engineering units are easily configured from a comprehensive selection.
Features- Displays actual temperature and alarm values
- 4 alarm values can be entered: low-low, low, high and high-high temperature alarm
- Large 17 mm (0.67") digits
- Selectable on-screen engineering units: °C, °F, K
- Explosion/flame proof Ex II 2 GD EEx d IIB T5
- Full Modbus communication RS232/485/TTL
- Loop or battery powered, 8 - 24 Vac / Vdc or 115 - 230 Vac power supply
- Sensor supply 3.2 / 8.2 / 12 / 24 Vdc
Specifications
Brand
Accuracy
- ± 0.125 % of Full Scale Output
Approvals & Certifications
- ATEX
- CE
- EMC
- IEC
- IEC Ex
Communication
- Modbus ASCII/RTU
Conduit Connection
- 1/2” NPT
- M12
- M16
- M20
- PG9
Display
- Numeric & Alphanumeric
Electrical Connectors
- Removable Plug-In Terminal Strip
Enclosure, Body Details
- Polycarbonate Window
- Silicone Sealed
Enclosure, Body Material
- Aluminum
- Die Cast Aluminum
- Fiberglass
- GRP (Glass-Reinforced Fibre Polyester)
- PolyCarbonate Window
- Silicone Sealing
Environmental Protection
- IP65
- IP67
- NEMA 4X / IP65, 67
Function
- Linear
Input
- 0-10 Vdc
- 4-20 mA
- Active Pulse Signals
- NAMUR
- NPN/PNP Pulse
- Reed Switch
- Sine Wave (Coil)
K-Factor
- Programmable from 0.0001 to 99999
Load Impedance
- 3,000 ohms Min.
Operating Temperature
- -30° to 80° C (-22° to 176° F)
Power Options
- 115-230 Vac
- 8-24 Vac/Vdc
Resolution
- 14-bits
Voltage Drop
- 2.5 V @ 20 mA
