Images are representations only.
F120 Flow Rate Controller
Brand: FluidwellThe F120 single loop controller has been designed to offer outstanding control performance and provide a reliable solution for a wide variety of flow control applications.
The single loop flow controller accepts most pulse inputs from flow meters and has a 4 - 20 mA output for controlling a valve or pump. The F120 is part of the Fluidwell process controller family and is the alternative for local control loops.
Features- Controls the desired volume or mass flow
- Displays flow rate, alarms, setpoint and total
- Large 17 mm (0.67") digits
- Safety mode input to place the controller in a safe predefined position
- Two alarm values can be intered in %: low and high flow rate alarm
- Bumpless switching between 2 operation modes: Hand and Auto
- Explosion/flame proof Ex II 2 GD EEx d IIB T5
- Full Modbus communication RS232/485/TTL
- Loop or battery powered, 8 - 24 Vac / Vdc or 115 - 230 Vac power supply
Specifications
Brand
Accuracy
- ± 0.125 % of Full Scale Output
Alarm
- High
- High-High
- Low
- Low-Low
Approvals & Certifications
- ATEX
- CE
- EMC
- IEC
- IEC Ex
Communication
- Modbus ASCII/RTU
Conduit Connection
- 1/2” NPT
- M12
- M16
- M20
- PG9
Display
- 0.67”
- Numeric & Alphanumeric
- Red LEDs
Electrical Connectors
- Removable Plug-In Terminal Strip
Enclosure, Body Material
- Aluminum
- Fiberglass
- PolyCarbonate Window
- Silicone Sealing
- Three Industrial Micro-Switch Keys. UV-Resistant Silicone Keypad
Environmental Protection
- IP65
- IP67
- NEMA 4X / IP65, 67
Function
- Linear
- Square Root
Input
- Active Pulse Signals
- NAMUR
- Reed Switch
- Sine Wave (Coil)
K-Factor
- Programmable from 0.0001 to 99999
Load Impedance
- 3,000 ohms Min.
Operating Temperature
- -30° to 80° C (-22° to 176° F)
Output
- 0-10 Vdc
- 4-20 mA
Power Options
- 115-230 Vac
- 8-24 Vac/Vdc
Resolution
- 14-bits
Voltage Drop
- 2.5 V @ 20 mA
