Images are representations only.
Air to Air Cylinder Boosters
Brand: Miller Fluid PowerStandard Air to Air boosters increase air pressures two, three, and four times high than the standard 80 to 100 PSI shop pressures.
Exact high output pressure is controlled by adjusting an air line regulator on the low pressure inlet line.
For example if you had 3 to 1 ratio booster, by adjusting the regulator on the low pressure side to 80 PSI, then the high pressure output would be 240 PSI.
By adjusting the regulator on the same booster to 60 PSI, then the high pressure output would be 180 PSI.
As you can see an infinite variation of high pressure can be obtained for your particular application.
Features- Two large port mounted 3-way valves assures faster recovery time of booster
- Exhaust mufflers provide quiet exhaust
- Mechanically held dynamic seals prevent seal damage due to pull out or blow out
- All dynamic seals are self-regulating and wear-compensating
- Honed chrome plated cylinder minimum seal friction to maintain high efficiency of the booster and resists rusting
- Connecting piston rod is hardened-chrome plated for better wear and surface
- Snap action actuators furnish full pressure to the pilot ports in the shortest time possible to prevent the booster from stalling prematurely
- Bar stock, heads and caps, phosphate coated to resist corrosion.
