Pneumatic Solenoid ISO Valve - DX ISOMAX 5599-1 Series
Brand: Parker - Fluid Control DivisionThe DX ISOMAX 5599 series valve is an internal/external air piloted subbase style valve.
The ISOMAX size 1, 2, and 3 valves are non-plug in only and can be mounted on a stand alone subbase or a multiple valve manifold. ¼, ⅜, or ½ NPT/BSPP ports are available.
Available valve functions are
- 5/2, single solenoid, spring or air return
- 5/2 position, double solenoid
- 5/3, double solenoid, all ports blocked or center exhaust
Each coil is wired individually with a 30 mm 3 pin DIN connector. The DX ISOMAX series valves can be field converted from internal to external pilot supply by moving the gaskets located under the solenoid operators.
Internal pilot operation means the supply pressure on the #1 port is directed to the end of the valve where the solenoid operator, when actuated, allows the supply pressure to pass, which is then applied to the piston to shift the spool.
External pilot is when the valve gets its "internal" pressure from an "external pilot port" instead of the #1 port. The ISOMAX valves use a ceramic seat for low friction, fast response, and resistance to contamination.
Features- Configurable internal / external piot
- Remote pneumatic or electric pilot
- Voltages range
- Long life duration thanks to its ceramic technology
Specifications
Pressure Range
- Vacuum to 145 psig (-0.9 to 10 bar)
Actuation
- Solenoid Air Operated
Input Supply Voltage
- 24 Vdc, 120 Vac
Mounting Style
- Manifold, Subbase
Fieldbus Protocol
- N/A
Minimum Operating Pressure (psig)
- 15
Seal Material
- Ceramic
Body Material
- Polyamide Reinforced Fiberglass
Approvals & Certifications
- ISO 5599-1, IP65
Temperature Range
- -10°C to +60°C (+14°F to +140°F)
Electrical Connectors
- 2-Pin M12, 3-Pin 22 mm, 3-Pin 30 mm
Number of Ports
- 5
Port Size
- ¼”, ⅜”, ½”
Nominal Flow (Qn-L/min)
- 1150
Number of Positions
- 2, 3
Maximum Flow (Q Maximum - L/min)
- 6420
Minimum Flow
- 1.15 Cᵥ
Maximum Flow
- 4.15 Cᵥ
Valve Type
- 4-Way
Port Type
- BSPP, NPT
Mounting Standard
- ISO 5599-1
Lubricant
- Not Required
Maximum Manifold Outlets
- 21
Overide Functionality
- N/A
Power Consumption
- 2.7 W, 3.7 VA
Media
- Inert Gases
- Machine Tool
- Vehicle Body Assembly/Welding
- Case Erectors
- Palletising
- Wrapping/Bundling