Images are representations only.
F114 Monitor/Totalizer
Brand: FluidwellThe Model F114 flow computer has been developed to calculate the actual ratio between two separate flows.
Typical applications are found where locally a two component product is mixed, for example in construction works, roof or wall isolation, glueing and coating.
The F114 offers the ability to set two low ratio and two high ratio alarm values. Special precautions are taken to allow start-up problems and incorrect ratio readings for a certain period of time.
Based on the location of the flow meters, a selection can be made out of six different formulas. A wide selection of options further enhances the capabilities of this model.
Features- Calculates ratio between flow A and B
- Displays ratio, flow rate A and B and total A and B (resettable)
- 4 alarm values can be entered: low-low, low, high and high-high ratio alarm
- Large 17 mm (0.67") digits
- Explosion/flame proof Ex II 2 GD EEx IIB T5
- Full Modbus communication RS232/485/TTL
- Loop or battery powered, 8 - 24 Vac / Vdc or 115 - 230 Vac power supply
- Sensor supply 3.2 / 8.2 / 12 / 24 Vdc
Specifications
Brand
Accuracy
- ± 0.125 % of Full Scale Output
Alarm
- High
- High-High
- Low
- Low-Low
Approvals & Certifications
- ATEX
- CE
- EMC
- IEC
- IEC Ex
Communication
- Modbus ASCII/RTU
Conduit Connection
- 1/2” NPT
- M12
- M16
- M20
- PG9
Display
- 0.67”
- Numeric & Alphanumeric
- Red LEDs
Electrical Connectors
- Removable Plug-In Terminal Strip
Enclosure, Body Details
- Polycarbonate Window
- Silicone Sealed
Enclosure, Body Material
- Die Cast Aluminum
- GRP (Glass-Fibre Reinforced Polyester)
Environmental Protection
- IP65
- IP67
- NEMA 4X / IP65, 67
Function
- Linear
- Square Root
Input
- 0-10 Vdc
- 4-20 mA
- Active Pulse Signals
- NAMUR
- Reed Switch
- Sine Wave (Coil)
K-Factor
- Programmable from 0.0001 to 99999
Load Impedance
- 3,000 ohms Min.
Operating Temperature
- -30° to 80° C (-22° to 176° F)
Power
- 115-230 Vac
- 8-24 Vac/Vdc
Resolution
- 14-bits
Voltage Drop
- 2.5 V @ 20 mA
