Images are representations only.
3320 Electromotive Process Valve
Brand: Burkert Fluid Control Systems
The innovative Burkert On/Off process valve Type 3320 is the solution when it comes to shut-off tasks under demanding operating conditions.
The electromotive actuator with ball screw moves the swivel plate at a particularly high rate of 6 mm/s to its desired end position. Thereby it reacts reacts almost instantaneously to process signals.
If necessary, the safety position can be approached by an optional energy storage in case of power failure. The actuator and shut-off valve are adapted perfectly to each other with closed design and robust surface. This ensures the hygienic requirements of a fast and residue-free cleaning.
Harsh environments are no problem for the Type 3320 because of the protection class IP65 / IP67 and its high impact and vibration resistance.
Unrivalled cycle life and sealing integrity is guaranteed by the proven self adjusting spindle packing with exchangeable V-seals.
The fieldbus suitable for Type 3320 provides many helpful functions for process monitoring, valve diagnostics and predictive maintenance and thus offers the decisive advantage of a modern process automation.
Specifications
Ambient Temperature Range
- With SAFEPOS Energy Storage: -25° to 55° C (-13° to 131° F) - the Allowable Value Decreases with Increasing Media Temperature
- Without SAFEPOS Energy Storage: -25° to 65° C (-13° to 149° F) - the Allowable Value Decreases with Increasing Media Temperature
Approvals & Certifications
- FDA
Battery Life
- Energy Storage SAFEPOS Energy-Pack: 10-Years - Depending on Operating Conditions
BSP Connection
- G 1” Female
- G 1/2” Female
- G 1-1/2” Female
- G 1-1/4” Female
- G 2” Female
- G 3/4” Female
- 1” BSPT Female
- 1/2” BSPT Female
- 1-1/2” BSPT Female
- 1-1/4” BSPT Female
- 2” BSPT Female
- 3/4” BSPT Female
Communication
- EtherNet/IP
- Modbus/TCP
- PROFINET
Cone Material
- Control: AISI 316 Stainless Steel, 1.4401
- Control: AISI 316L Stainless Steel, 1.4401
Control Functions Characteristics
- Binary Control: Log (0, 1)
Current
- Operating: 3 A, Max.
Duty Cycle
- 100 % Duty Cycle
Electrical Connectors
- 2 Circular Plug-In Connector M12, 5-Pin & 8-Pin
- 2 x M20, Cable Gland
Enclosure, Body Material
- Actuator: Aluminum Powder-Coated
- Valve: 316L Stainless Steel
Environmental Protection
- IP65
- IP67
Flow Rate
- 5 to 62 m³/hour (Kvs) - Water
Indication
- LED
Input
- 0-5 V (Log 0) - Inverted Input Reversed Accordingly
- 10-30 V (Log 1) - Inverted Input Reversed Accordingly
Interface Connection
- CAN
- USB-Bus
Materials of Construction
- Actuator (Top, Bottom Part): Polyphenylene Sulfide
Media
- Alcohols
- Alkali Solution
- Fuel
- Hydraulic
- Neutral Gases
- Oil
- Organic Solvents
- Salt Solution
- Steam
- Water
Nominal Pressure
- psi: 362.6 (kPa: 2,500, bar: 25) - Max.
NPT Connection
- 1” NPT Female
- 1/2” NPT Female
- 1-1/2” NPT Female
- 1-1/4” NPT Female
- 2” NPT Female
- 3/4” NPT Female
Operating Pressure
- PEEK/Stainless Steel - psi: 72.5 to 232 (kPa: 500 to 1,600, bar: 5 to 16)
- PTFE / Stainless Steel - psi: 87 to 232 (kPa: 600 to 1,600, bar: 6 to 16)
Operating Voltages
- 24 Vdc ± 10 %, Max.
Operation
- Electrical Operation
- Manual Operation
Output
- Digital Current Limit: 100 mA
Packing Material
- Spindle: PTFE
Power
- Electronic without Actuator (W): 2-4 W, Max.
Power Supply
- 24 Vdc
Power Supply Effect
- 24 Vdc ± 10 %, Max.
Process Temperature
- Seat Sealing PEEK/Steel: -10° to 185° C (14° to 365° F)
- Seat Sealing PTFE/Steel: -10° to 130° C (14° to 266° F)
Response Time
- Closure Time: < 2.3 to 4.3 seconds - Depending on Stroke
Seat / Seal Material
- PEEK
- PTFE
- Seal: EPDM
- Steel
Shock
- Mechanical: 50 G According to IEC 60068-2-27 Test Ea
Speed
- Travel: 6 mm/sec
Spindle Material
- AISI 316 Stainless Steel, 1.4401
- AISI 316L Stainless Steel, 1.4401
- Guidance: PEEK
Switch Type
- 4 DIP Switches
Tri-Clamp Connection
- 1” Tri-Clamp
- 1/2” Tri-Clamp
- 1-1/2” Tri-Clamp
- 1-1/4” Tri-Clamp
- 2” Tri-Clamp
- 3/4” Tri-Clamp
Tube Connection
- 1” Tube
- 1/2” Tube
- 1-1/2” Tube
- 1-1/4” Tube
- 2” Tube
- 3/4” Tube
Valve Type
- Automated
- Manual
Vibration
- Sinusoidal: 5 G According to IEC 60068-2-6 Test Fc
Viscosity
- 600 mm²/sec, Max.
Voltage
- Binary Control: 0-5 V (Log 0)
- Binary Control: 10-30 V (Log 1)
Welded Connection
- 1” Weld End
- 1/2” Weld End
- 1-1/2” Weld End
- 1-1/4” Weld End
- 2” Weld End
- 3/4” Weld End
