Images are representations only.
F115 Indicator/Totalizer
Brand: FluidwellThe F115 has been developed for applications where the direction of flow is an issue.
Applications can be found by loading and unloading of ships where one bi-directional flow meter is used. Another application is the correction of back-flow due to shocks in a pipeline caused by piston pumps or valve behavior.
It is required to offer two pulse signals from the flow meter which are 90° or 270° degrees out of phase. A wide selection of options further enhances this models capabilities.
Features- Detects flow direction with quadrature signal inputs
- Displays positive / negative flow rate referencing flow direction
- Displays forward & reverse total and accumulated total count up and down referencing flow direction
- Large 17 mm (0.67") digits for flow rate or total
- Selectable on-screen engineering units; volumetric or mass
- Explosion/flame proof Ex II 2 GD EEx d IIB T5
- Full Modbus communication RS232/485/TTL
- Loop or battery powered, 8 - 24 Vac / Vdc or 115 - 230 Vac power supply
- Sensor supply 3.2 / 8.2 / 12 / 24 Vdc
Specifications
Brand
Alarm
- High
- High-High
- Low
- Low-Low
Approvals & Certifications
- ATEX
- CE
- EMC
- IEC
- IEC Ex
Communication
- Modbus ASCII/RTU
Conduit Connection
- 1/2” NPT
- M12
- M16
- M20
- PG9
Display
- 0.67”
- Numeric & Alphanumeric
- Red LEDs
Electrical Connectors
- Removable Plug-In Terminal Strip
Enclosure, Body Details
- Polycarbonate Window
- Silicone Sealed
Enclosure, Body Material
- Die Cast Aluminum
- GRP (Glass-Fibre Reinforced Polyester)
Environmental Protection
- IP65
- IP67
- NEMA 4X / IP65, 67
Function
- Linear
- Square Root
Input
- Active Pulse Signals
- NAMUR
- Reed Switch
- Sine Wave (Coil)
K-Factor
- Programmable from 0.0001 to 99999
Operating Temperature
- -30° to 80° C (-22° to 176° F)
Output
- 0-10 Vdc
- 4-20 mA
Power
- 115-230 Vac
- 8-24 Vac/Vdc
