Images are representations only.
Pneumatic Solenoid Valve - Heavy-Duty Poppet Valve Series
Brand: Parker - Fluid Control DivisionThese valves use the well proven poppet principle to give high flow rates with short valve travel.
Both the 2/2 and 3/2 valves in the range are available in G⅜" and G½" post sizes, meaning that each actuator is available in four configurations. All valves are normally closed.
The bodies are of block form construction for ease of mounting.
Springs are stainless steel with internal seals made of nitrile rubber.
The 2/2 body allows air in one direction only, 3/2 versions have the facility of exhausting air through the actuator unit.
This exhaust vent is unthreaded on all valves except the pilot and solenoid types which allows the piping away of exhaust air.
All mechanisms are spring returned.
Features- High Flow
- Harsh Environment Resistant
- Multiple Pilot Voltage
Specifications
Actuation
- Solenoid Air Operated, Manual or Mechanical Operated
Approvals & Certifications
- IP65
Body Material
- Zinc Die Cast
Electrical Connectors
- 22 mm: 3-Pin (DIN 43650 Form B)
Fieldbus Protocol
- N/A
Input Supply Voltage
- 12/24 Vdc, 12/24/120/240 Vac
Lubricant
- Non-Lube
Maximum Flow (Q Maximum - L/min)
- 3240 to 4500
Media
- Air
Minimum Operating Pressure
- 28 psig
Nominal Flow (Qn-L/min)
- 1980 to 2580
Number of Ports
- 2, 3
Number of Positions
- 2
Overide Functionality
- Non-Locking & Locking Manual Overrides
Port Size
- ⅜”, ½”
Port Type
- BSPP
Pressure Range
- Vacuum to 150 psig (10 bar)
Seal Material
- Nitrile
Temperature Range
- -10°C to 80°C / -10°C to 50°C (Solenoid Operated)
- 14°F to 176°F / 14°F to 122°F (Solenoid Operated)
- Actuator Piloting
