Images are representations only.
8006 Mass Flow Meter
Brand: Burkert Fluid Control Systems
The mass flow meter (MFM) type 8006 is suited for measuring the mass flow of high gas flows. The thermal inline sensor is located directly in the gas stream and therefore reaches very fast response times.
Type 8006 can optionally be calibrated for two different gases; the user can switch between these two gases. As electrical interfaces both, Analog standard signals and fieldbuses are available.
The MFM type 8006 is especially designed for use in harsh environments due to a low sensitivity to contamination and the high protection class.
Specifications
Accuracy
- ± 0.3 % of Full Scale after 15 minutes Warm-Up Time
- ± 1.5 % of Reading after 15 minutes Warm-Up Time
Ambient Temperature Range
- -10° to 45° C (14° to 113° F)
Applications
- Harsh Environments
Approvals & Certifications
- CE
BSP Connection
- G 1” Female
- G 1/2” Female
- G 1/4” Female
- G 3/4” Female
- G 3/8” Female
Communication
- CAN Bus
- DeviceNet Bus
- Digital
- FOUNDATION Fieldbus, CANopen
- Modbus RTU
- PROFIBUS DP
- RS-232
- RS-422
- RS-485
- USB
Consumption
- Power Consumption Fieldbus: 4-12.5 W (According to Version)
- Power Consumption: 3.5-10 W
Electrical Connectors
- DeviceNet & CANopen: M12 Plug, 5-Pin
- D-Sub 15-Pin Connector
- PROFIBUS-DP, DeviceNet & CANopen & RS-485 Version Only: D-Sub 9-Pin Connector
- PROFIBUS-DP: Socket M12 5-Pin
- Socket M16, 8-Pin Round Connector
Electrical Contacts
- Normally Closed
- Normally Open
Enclosure Finish
- Aluminum
Enclosure, Body Material
- Aluminum
- Stainless Steel
Environmental Protection
- Typical of Protection: IP65
Flow Rate
- Nominal Flow Range: 20 to 2,500 LPM
Indication
- LED Indication for Power, Communication, Limit & Error
Media
- Air
- Neutral Gasses
Mounting Position
- Horizontal
- Vertical
NPT Connection
- 1” NPT Female
- 1/2” NPT Female
- 1/4” NPT Female
- 3/4” NPT Female
- 3/8” NPT Female
Operating Pressure
- Maximum
Operating Voltages
- 24 Vdc
Output
- Analog Communication: 0-10 V (Actual Flow)
- Analog Communication: 0-20 mA (Actual Flow)
- Analog Communication: 0-5 V (Actual Flow)
- Analog Communication: 4-20 mA (Actual Flow)
- Maximum
Output Load
- Maximum
Process Temperature
- -10° to 60° C (14° to 140° F) with Oxygen
- Gas: -10° to 70° C (14° to 158° F)
Relay Output
- One Relay Output for RS-485 Version: 1 A at 25 V, 25 VA
- Two Relay Outputs for Analog Signal & Fieldbus Version: 1 A at 60 V, 60 VA
Repeatability
- ± 0.1 % of Full Scale
Response Time
- < 500 milliseconds
Seat / Seal Material
- Seal: EPDM
- Seal: FKM
Sensor Circuit
- Residual Ripple: < 2 %
Sensor, Probe Style
- InLine
Tolerance
- Voltage: ± 10 %
Turndown
- 1:50
- Harsh Environments
