Images are representations only.
Price
$3,616.00
CAD
Stock
50+ In Stock
Does not ship to OH, United States
- Version - Circuit Function B (NO, Normally Open), Brass Body
- Seal Material / Coil / Process Temperature - NBR / Epoxy / -10° to 80° C (14° to 176° F)
- Port Connection / Orifice - G1-1/4” / 40 mm
- Voltage / Frequency - 24 V, 50 Hz
Specifications
Ambient Temperature Range
- Maximum
Approvals & Certifications
- European Gas Approval EPDM with KTW W270
- IECEx PTB 14.0049 x Ex Mb IIC T4 Gb Ex Mb IIIC T130° C (266° F) Db (Explosion-proofed), IECEx EPS 16.0021 x Ex Eb Mb IIC T4 Gb Ex Mb Tb IIIC T130° C (266° F) Db (Coil & Junction Box)
- PTB 14-ATEX-2023 x II 2 G Ex Mb IIC T4 Gb II 2D Ex Mb IIIC T130° C (266° F) Db (Explosion-proofed), EPS 16-ATEX-1046 x II 2 G Ex Eb Mb IIC T4 Gb II 2D Ex Mb Tb IIIC T130° C (266° F) Db (Coil & Junction Box)
- VDE Mark Approval According to DIN EN 60730
BSP Connection
- G 1” Female
- G 1/2” Female
- G 1-1/2” Female
- G 1-1/4” Female
- G 2” Female
- G 2-1/2” Female
- G 3/4” Female
- G 3/8” Female
- 1” BSPT Female
- 1/2” BSPT Female
- 1-1/2” BSPT Female
- 1-1/4” BSPT Female
- 2” BSPT Female
- 3/4” BSPT Female
Consumption
- Power Consumption (DC Hot/Cold Coil): 9 W - Ex Coil (with Internal Rectifier) Circuit Function A & B
- Power Consumption (Hold with Coil AC): 14 / 8 VA / W - Circuit Function A
- Power Consumption (Hold with Coil AC): 16 / 7 VA / W - Circuit Function B
- Power Consumption (Hold with Coil DC): 8/9.5 W (Hot/Cold Coil) - Circuit Function A & B
- Power Consumption (Inrush AC): 24 VA - Circuit Function A & B
- Power Consumption (Inrush, Hold with Coil AC): 9 VA / W - Ex Coil (with Internal Rectifier) Circuit Function A & B
Diaphragm Material
- Diaphragm Holder (PPSGF40, DN 50): Brass
- Diaphragm Holder (PPSGF40, DN 50): Stainless Steel
- EPDM
- FKM
- NBR
Duty Cycle
- 100 % Continuous Rating
Electrical Connectors
- Tag Connector According to DIN EN 175301-803 Form A for Cable Plug Typical 2508
Electrical Contacts
- Normally Closed
- Normally Open
Enclosure, Body Material
- 316 Stainless Steel - ASTM A351 CF8M, 1.4408
- Brass According to DIN EN 50930-6
Environmental Protection
- IP65 with Junction Box, Cable Plug & Cable Connection
- IP66
- NEMA 4X
- Vibration-Proof
Flow Rate
- Water: 3.8 to 40 Kv (m³/hour)
Insulation
- Epoxy: Coil Isolation Class H
- Polyamide: Coil Isolation Class B
Internal Part Material
- Valve: Brass
- Valve: Plastic (PPS)
- Valve: Stainless Steel
Materials of Construction
- Coil: Epoxy with FKM Seal
- Coil: Polyamide with NBR, EPDM Seal
- Stopper, Magnetic Core: 434 Stainless Steel
Mounting Position
- Preferably with Actuator Upright
NPT Connection
- 1” NPT Female
- 1/2” NPT Female
- 1-1/2” NPT Female
- 1-1/4” NPT Female
- 2” NPT Female
- 2-1/2” NPT Female
- 3/4” NPT Female
O-Ring Material
- EPDM
- FKM
- NBR
Orifice Size
- 0.511” to 1.968” (13 to 50 mm)
Override
- Manual Override
Pressure Range
- psi: 2.901 to 232.1 (kPa: 20 to 1,600, bar: 0.2 to 16)
Process Temperature
- EPDM: -30° to 90° C (-22° to 194° F) [with Epoxy Coil to 100° C (212° F)]
- FKM: 0° to 90° C (32° to 194° F) [(with Epoxy Coil to 120° C (248° F)]
- NBR: -10° to 80° C (14° to 176° F)
Response Time
- 0.1 to 4 seconds (Depending on Orifice & Differential Pressure)
Ring Material
- Short Circuit Ring: Copper (Cu) with Brass Body
- Short Circuit Ring: Silver (Ag) with Stainless Steel Body
Seat / Seal Material
- Armature Seal: EPDM (Media: Oil & Fat-Free Fluids, Hot Water, Aceton, Aqueous Alkali Solution)
- Armature Seal: FKM (Media: Hot Air, Per-Solution)
- Armature Seal: NBR (Media: Neutral Fluids, Compressed Air, Water)
Solenoid Type
- 2/2-Way
Spring Material
- 301 Stainless Steel, 1.4310
Tolerance
- Voltage Tolerance: ± 10 %
Voltage
- 230 V / 50/60 Hz / UC
- 24 V / 50/60 Hz / UC
- 24 Vdc
