Price
$2,436.00
CAD
Stock
50+ In Stock
Does not ship to OH, United States
Specifications
Ambient Temperature Range
- Operating & Storage: -15° to 60° C (5° to 140° F)
Approvals & Certifications
- PED 2014/68/EU
- EU Directives
- FDA
- CE
- 3-Points Flow Calibration Certificate
- Certification of Conformity for the Surface Quality (DIN 4762-DIN 4768-ISO /4287/1)
- EN-ISO 10204, ISO 5167-1
- Inspection Certificate 3.1 (According to EN-ISO 10204)
- Test Report 2.2 (According to EN-ISO 10204)
Bearing Material
- Ceramics (AL₂O₃)
BSP Connection
- G 1” Female
- G 1/2” Female
- G 1/2” Male
- G 1/4” Male
- G 1-1/2” Female
- G 1-1/4” Female
- G 2” Female
- G 3/4” Female
- 1” BSPT Female
- 1/2” BSPT Female
- 1/2” BSPT Male
- 1-1/2” BSPT Female
- 1-1/4” BSPT Female
- 2” BSPT Female
- 3/4” BSPT Female
Cable Material
- 1 metre Cable: PVC
Circuit Protection
- Short Circuit Protected for Transistor Output
Consumption
- Current: < 60 mA at 12 Vdc for Current Version, without Load
Current
- 4-20 mA, 3-Wire
Diameter
- Pipe: 1/4 to 2-1/2” (DN06 to DN 65)
Electrical Connectors
- 1 metre Cable Via Cable Gland
- 1.5 mm², Max.
- Free Positionable 5-Pin M12 Male Fixed Connector
Electrical Protection
- Voltage Peak: Protected
Enclosure, Body Material
- PPS
Environmental Protection
- IP65
- IP67
Frequency
- Output: 0 to 250 Hz
Gland Material
- Polyamide (PA)
Humidity
- ≤ 80 % Relative Humidity, Non-Condensing
Indication
- LED
Linearity
- ± 0.5 % of Full Scale
Loop Impedance
- 1,125 ohms at 36 Vdc, Max.
- 140 ohms at 12 Vdc, Max.
- 650 ohms at 24 Vdc, Max.
Materials of Construction
- M12 Fixed Connector: Polyamide (PA)
Measuring Error
- Measurement Deviation (Standard K-factor): ± 2.5 % of the Measured Value
- Measurement Deviation (Teach-In): ± 1 % of the Measured Value
Measuring Range
- 0.3 to 10 m/sec
NPT Connection
- 1” NPT Female
- 1/2” NPT Female
- 1/2” NPT Male
- 1/4” NPT Male
- 1-1/2” NPT Female
- 1-1/4” NPT Female
- 2” NPT Female
- 3/4” NPT Female
O-Ring Material
- EPDM
- FKM
Output
- Transistor (NPN): 0.2-36 Vdc
- Transistor: 700 mA - Max.
Output Format
- Open Collector
Pipe Connection
- DN 15 Pipe
- DN 20 Pipe
- DN 25 Pipe
- DN 32 Pipe
- DN 40 Pipe
- DN 50 Pipe
- DN 65 Pipe
Power Supply
- 12-36 Vdc, Filtered & Regulated
Pressure Range
- bar: 0 to 16
- kPa: 0 to 1,600
- psi: 0 to 232
Process Connection Material
- Metal
- Plastic
Process Temperature
- PP Fitting: 0° to 80° C (32° to 176° F)
- PVC Fitting: 0° to 60° C (32° to 140° F)
- Stainless Steel or Brass Fitting: -15° to 100° C (5° to 212° F) (If T° Ambient ≤ 45° C)
- Stainless Steel or Brass Fitting: -15° to 90° C (5° to 194° F) (If 45° C ≤ T° Ambient ≤ 60° C)
Repeatability
- ± 0.4 % of the Measured Value
Reverse Polarity Protection
- Yes
Seat / Seal Material
- Seal: EPDM
- Seal: FKM
Switch Type
- Transistor (NPN & PNP)
Tri-Clamp Connection
- DN 15 Tri-Clamp
- DN 20 Tri-Clamp
- DN 25 Tri-Clamp
- DN 32 Tri-Clamp
- DN 40 Tri-Clamp
- DN 50 Tri-Clamp
- DN 65 Tri-Clamp
Viscosity
- 300 cSt, Max.
Welded Connection
- DN 15 Weld End
- DN 20 Weld End
- DN 25 Weld End
- DN 32 Weld End
- DN 40 Weld End
- DN 50 Weld End
- DN 65 Weld End
Wetted Materials
- Axis: Ceramics (AL₂O₃)
- Fitting: 316L Stainless Steel, 1.4404
- Fitting: Brass
- Fitting: Polypropylene (PP)
- Fitting: PVC
- Paddle Wheel, Holder: PVDF