Price
$4,118.00 CAD
Stock
4 In Stock
Does not ship to OH, United States

  • Material - Brass
  • Process Connection - Internal Thread
  • Standard - Rc
  • Output - Pulse
  • Size - DN 15

Specifications

Ambient Temperature Range

  • Operating & Storage: -15° to 60° C (5° to 140° F)

Approvals & Certifications

  • PED 2014/68/EU
  • EU Directives
  • FDA
  • CE
  • 3-Points Flow Calibration Certificate
  • Certification of Conformity for the Surface Quality (DIN 4762-DIN 4768-ISO /4287/1)
  • EN-ISO 10204, ISO 5167-1
  • Inspection Certificate 3.1 (According to EN-ISO 10204)
  • Test Report 2.2 (According to EN-ISO 10204)

Bearing Material

  • Ceramics (AL₂O₃)

BSP Connection

  • G 1” Female
  • G 1/2” Female
  • G 1/2” Male
  • G 1/4” Male
  • G 1-1/2” Female
  • G 1-1/4” Female
  • G 2” Female
  • G 3/4” Female
  • 1” BSPT Female
  • 1/2” BSPT Female
  • 1/2” BSPT Male
  • 1-1/2” BSPT Female
  • 1-1/4” BSPT Female
  • 2” BSPT Female
  • 3/4” BSPT Female

Cable Material

  • 1 metre Cable: PVC

Circuit Protection

  • Short Circuit Protected for Transistor Output

Consumption

  • Current: < 60 mA at 12 Vdc for Current Version, without Load

Current

  • 4-20 mA, 3-Wire

Diameter

  • Pipe: 1/4 to 2-1/2” (DN06 to DN 65)

Electrical Connectors

  • 1 metre Cable Via Cable Gland
  • 1.5 mm², Max.
  • Free Positionable 5-Pin M12 Male Fixed Connector

Electrical Protection

  • Voltage Peak: Protected

Enclosure, Body Material

  • PPS

Environmental Protection

  • IP65
  • IP67

Frequency

  • Output: 0 to 250 Hz

Gland Material

  • Polyamide (PA)

Humidity

  • ≤ 80 % Relative Humidity, Non-Condensing

Indication

  • LED

Linearity

  • ± 0.5 % of Full Scale

Loop Impedance

  • 1,125 ohms at 36 Vdc, Max.
  • 140 ohms at 12 Vdc, Max.
  • 650 ohms at 24 Vdc, Max.

Materials of Construction

  • M12 Fixed Connector: Polyamide (PA)

Measuring Error

  • Measurement Deviation (Standard K-factor): ± 2.5 % of the Measured Value
  • Measurement Deviation (Teach-In): ± 1 % of the Measured Value

Measuring Range

  • 0.3 to 10 m/sec

NPT Connection

  • 1” NPT Female
  • 1/2” NPT Female
  • 1/2” NPT Male
  • 1/4” NPT Male
  • 1-1/2” NPT Female
  • 1-1/4” NPT Female
  • 2” NPT Female
  • 3/4” NPT Female

O-Ring Material

  • EPDM
  • FKM

Output

  • Transistor (NPN): 0.2-36 Vdc
  • Transistor: 700 mA - Max.

Output Format

  • Open Collector

Pipe Connection

  • DN 15 Pipe
  • DN 20 Pipe
  • DN 25 Pipe
  • DN 32 Pipe
  • DN 40 Pipe
  • DN 50 Pipe
  • DN 65 Pipe

Power Supply

  • 12-36 Vdc, Filtered & Regulated

Pressure Range

  • bar: 0 to 16
  • kPa: 0 to 1,600
  • psi: 0 to 232

Process Connection Material

  • Metal
  • Plastic

Process Temperature

  • PP Fitting: 0° to 80° C (32° to 176° F)
  • PVC Fitting: 0° to 60° C (32° to 140° F)
  • Stainless Steel or Brass Fitting: -15° to 100° C (5° to 212° F) (If T° Ambient ≤ 45° C)
  • Stainless Steel or Brass Fitting: -15° to 90° C (5° to 194° F) (If 45° C ≤ T° Ambient ≤ 60° C)

Repeatability

  • ± 0.4 % of the Measured Value

Reverse Polarity Protection

  • Yes

Seat / Seal Material

  • Seal: EPDM
  • Seal: FKM

Switch Type

  • Transistor (NPN & PNP)

Tri-Clamp Connection

  • DN 15 Tri-Clamp
  • DN 20 Tri-Clamp
  • DN 25 Tri-Clamp
  • DN 32 Tri-Clamp
  • DN 40 Tri-Clamp
  • DN 50 Tri-Clamp
  • DN 65 Tri-Clamp

Viscosity

  • 300 cSt, Max.

Welded Connection

  • DN 15 Weld End
  • DN 20 Weld End
  • DN 25 Weld End
  • DN 32 Weld End
  • DN 40 Weld End
  • DN 50 Weld End
  • DN 65 Weld End

Wetted Materials

  • Axis: Ceramics (AL₂O₃)
  • Fitting: 316L Stainless Steel, 1.4404
  • Fitting: Brass
  • Fitting: Polypropylene (PP)
  • Fitting: PVC
  • Paddle Wheel, Holder: PVDF

show more