Price
$4,689.00 CAD
Stock
25+ In Stock
Does not ship to OH, United States

  • Seal Material - NBR
  • Orifice DN / Port Connection - 13 mm / G 3/4"
  • Voltage / Frequency - 110 V / 50/60 Hz

Specifications

Ambient Temperature Range

  • Maximum

Approvals & Certifications

  • CSA
  • RoHS
  • UR

BSP Connection

  • G 1” Female
  • G 1/2” Female
  • G 3/4” Female
  • G 3/8” Female
  • 1” BSPT Female
  • 1/2” BSPT Female
  • 3/4” BSPT Female
  • 3/8” BSPT Female

Consumption

  • Power Consumption (AC): 6 VA (Hold)
  • Power Consumption (AC): 9 VA (Inrush)
  • Power Consumption (DC): 4 W (Inrush (Hot), Hold)
  • Power Consumption (DC): 5 W (Inrush (Cold))

Cover Material

  • Body Cover: Polyamide
  • Body Cover: Polyphenylene Ether

Diaphragm Material

  • Diaphragm Holder, Support: Polyphenylene Sulfide
  • Diaphragm Holder: Brass

Duty Cycle

  • 100 % Continuous Rating

Electrical Connectors

  • According to DIN 43650 Form B (Industrial Standard) for Cable Plug Typical 2507
  • According to DIN EN 175301-803 Form C for Cable Plug Typical 2516

Electrical Contacts

  • Normally Closed

Enclosure, Body Material

  • Brass (DIN 50930-6)

Environmental Protection

  • IP65 with Cable Plug

Flange Material

  • Steel (Thick Fillm Passivated According to Rohs)

Flow Rate

  • Water: 1.9 to 8.3 Kv (m³/hour) Measured at 20° C (68° F) & psi: 14.5 (kPa: 100, bar: 1) Pressure Differential over A Fully Opened Valve

Materials of Construction

  • Coil (Cable Plug Form B - Class H, Flying Leads): Epoxy
  • Coil (Cable Plug Form C - Class B): Polyamide
  • Plunger: 430FR Stainless Steel (1.4105)

Mounting Position

  • Preferably with Actuator Upright

NPT Connection

  • 1” NPT Female
  • 1/2” NPT Female
  • 3/4” NPT Female
  • 3/8” NPT Female

Nut & Bolt Material

  • Bolt: Brass
  • Locknut: Steel (Thick Film Passivated According to Rohs)

O-Ring Material

  • EPDM
  • FKM
  • NBR

Operating Voltages

  • 24 Vdc
  • 24-230 V / 50/60 Hz

Orifice Size

  • 0.39” to 0.78” (10 to 20 mm)

Pressure Range

  • psi: 7.252 to 145 (kPa: 50 to 1,000, bar: 0.5 to 10)

Process Temperature

  • EPDM: -10° to 70° C (14° to 158° F)
  • NBR, FKM: 0° to 70° C (32° to 158° F)

Response Time

  • Closing: 100 to 700 milliseconds (Pressure Relief 100 to 10 %)
  • Opening: 20 to 400 milliseconds (Pressure Build-Up 0 to 90 %)

Ring Material

  • Shading Ring: Copper

Seat / Seal Material

  • Seal: EPDM (Media: Oil & Fat-Free Media, Alkaline Washing & Bleaching Lyes)
  • Seal: FKM (Media: Per-Solutions, Oils with Additives)
  • Seal: NBR (Media: Neutral Gases & Fluids, Compressed Air, Water, Hydraulic Oil, Oil, Fat without Additives)

Solenoid Type

  • 2/2-Way

Spring Material

  • 301 Stainless Steel, 1.4310

Tolerance

  • Voltage Tolerance: ± 10 %

show more